Product Description
The Automatic Drawing Machine is used for brushing grain processing equipment for all kinds of short and long copper, iron and stainless steel parts. The main parts include drum, motor, control panel, etc. The overall performance of our Automatic Drawing Machine is stable and reliable, resistant to wear and tear, and can process the ideal work piece for you. If you are looking for a drawing machine, our product will not let you down.
Detailed Photos
Applicable raw material: carbon steel wire of low carbon, middle and high carbon
High efficiency & Easy operation
Equipment maintenance:
The equipment shall be thoroughly maintained and overhauled once a month (shut down for 4 hours).
1, daily maintenance:
* Keep the external equipment clean and clean, check whether the gas supply pipeline and quick connection are good.
* The upper and lower bearing seats and lifting screw lubrication (grease gun refueling).
* discharge the water in the air filter.
* Check the sand belt and make balance adjustments.
2. Weekly maintenance:
* remove the mud left by daily maintenance, lubrication maintenance according to the daily maintenance requirements.
* Check the conveyor belt and its tensioning (if the tensioning is too loose, please adjust to moderate).
* Check the sand belt and its tension (if the tension is too loose, please adjust to moderate).
| Parameter |
ValueSpeed |
| Speed |
4m/s to 7m/s |
| Max diameter of raw wire rod |
16mm |
| Strength of raw wire rod |
≤1250Mpa |
| Min diameter of output wire |
3mm |
| Drawing block |
1 to 9 |
| Average reduction ratio |
20% |
| Diameter of drum |
560mm to 1200mm |
Company Profile
Audited Supplier 
){kind=link}
){kind=link}