| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Automatic Grade: | Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Wire diameter(mm)
MIG/CO2 Solid wire 0.8, 1.0, 1.2, 1.6
SAW solid wire 2.0, 2.5, 3.2, 4.0, 5.0
I. Process flow:
II. 1. Wire rod pre-treatment: remove the dirty from the wire surface.
III. 2. Wire drawing: drawing the wire from large diameter to small diameter.
IV. 3. Copper coating: pay-off + constant tension adjusting + wire supporting wheel and wire turning wheel + big turning device + mechanical degrease + electrolytic acid pickling(rough cleaning) + electrolytic alkaline cleaning(fine cleaning) + hot water wash + former neutralize + electrolytic acid pickling - cool water clean + activate acid cleaning + chemical copper coating + cool water clean + Neutralized + hot water wash + dry + wire press fix wheel(roller) + big turning device + polishing drawing + take up machine
V. 4. Layer winding machine: respooling the welding wire from the steel spool onto small plastic bobbin.
VI. 5. Drum packing machine: coil the welding wire onto drum.
|
No. |
Equipment |
Model No. |
Qty |
|
1 |
Gas shielded |
1 | |
|
Pay-off unit |
FSSK1000B |
1 | |
|
Mechanical peeling unit |
XBK-6D980 |
1 | |
|
Impurities removal unit |
XSD-980A |
1 | |
|
Straight type wire drawing machine |
BZ6/560 + 9/450 |
1 | |
|
Copper-coating unit |
XDHD-105C |
1 | |
|
Hot-water rinsing unit |
XRW-105E |
1 | |
|
After drying box |
XGH-105D50B |
1 | |
|
Cold air duc |
QFL-105A |
1 | |
|
QFL-105A |
ZQ1/450 |
1 | |
|
Powder removal unit |
XGC-105B XGC-105B |
1 | |
|
Tension box |
XZLX-HS |
2 | |
|
Take-up spool |
SG800 |
1 | |
| 2 |
Automatic
|
||
|
Concentrated sulfuric acid tank |
NSCC/500L |
1 | |
|
Auxiliary tank |
CJPZ/500L |
1 | |
| 3 |
Wiredrawing dust removal unit |
XCCXT-560 |
1 |
| 4 |
Dust removal machine |
XXCCG-30 |
1 |
| 5 |
Filter press machine |
XYL-30B |
1 |
| 6 |
Caliper |
CJY-001 |
1 |
){kind=link}