Cold Drawing Machine Rebar Straightener Wire Mesh Cutting Machine

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Years
• Model NO.: customization
• Control System: PLC
• Speed: 20m/S
• Maximum Inlet Diameter: 8mm
• Transport Package: Standard Pacakge
• Trademark: Hylite
• Origin: China

Product Description

 

Product Description

 

Cold drawing machine rebar Straightener wire mesh cutting machine 

This Wire Drawing Machine adopts the latest advanced technology in Europe and the production experience accumulated by our company over the years and our patented technology, for the majority of users to produce energy saving, environmental protection, intelligent and efficient wire drawing production line.

Product Parameters

 

Project Name	Technical specification
Drawing block	1~16
Design speed	20m/s
Maximum inlet diameter	Ø 6.5mm
Inlet strength	≤1250Mpa
Minimum occurrence diameter	Ø0.8mm
Reduction per draft	23%
Drum diameter	Ø1200, Ø1000, Ø900, Ø600, Ø560
Coil surface treatment method	Solid surface hardening
Drum surface hardness	≥HRC55
Roll cooling method	The hollow shaft is closed inside water cooling and outside air cooling
Dynamic configuration	37-132kW
Kind of drive	Belt and hard tooth gear reducer
Speed adjustment mode	AC variable frequency
Control mode	PLC bus control
Take-up with H wheel size	800/1120/1250/1400mm
Online dust removal environmental protection equipment selection	11KW
Siemens Intelligent control System	standard configuration
Item	Cold drawing machine rebar Straightener wire mesh cutting machine

 

Detailed Photos

 

 

 

 

Related equipment
 

 

  

Equipment maintenance

(1) Check before starting each shift: whether the electrical system of the cold mill is normal; Check whether the oil level of each tank is normal; Whether each filling position is filled with oil; Base material feeding is reasonable, etc.

(2) The electrical part of the cold rolling machine should often clean up dust and debris.

(3) The moving parts should often check whether the fastening is loose and reasonable.
(4) The cold rolling machine in the production process, can not be used beyond the limit, so as not to cause damage to some mechanical parts of the cold rolling machine, should be rolled according to the rolling standard, in order to ensure the safe use of the cold rolling machine equipment and the qualified products.